|
| |
JV-KG Series, Spur Gear,
Positive Displacement Flow Meters
JVM Positive Displacement Flow
Meters
HPM Series, Spur Gear Positive
Displacement Flow Meters
JVS/HPM-SLG Series, Positive Displacement Flow Meters
ZHM Series, Spur Gear Positive
Displacement Flow Meters
SRZ Series,
Helical Gear, Positive Displacement Flow Meters
CUSTOMER ENQUIRY FORM
|
JV-KG Series, Spur Gear,
Positive Displacement Flow Meters |
|
For nonabrasive fluids such as oil, grease,
fuel, solvents, polyurethanes, brake fluids, petrochemicals & skydrol.
 |
Flow Range: 0.01…454LPM
|
|
Accuracy: ±0.5% of reading
|
|
Repeatability: ± 0.1%
|
|
Pressure: 5000 PSI max (Optional
14000 PSI) |
|
Body: Aluminum, 303 or 316 SUS
|
|
Temp: 85°C(Al body), 204°C(SUS
body) max |
|
Sensors: pulse, mA or voltage
|
|
Economical cost with Ball bearing design
|
|
Consistent accuracy independent of
viscosity change even at very low flow rate |
|
Excellent dynamic
response |
|
|
  |
|
JVM Positive Displacement Flow
Meters |
|
For non-lubricating
fluids such as paints, adhesive, sealants and resins.
|
Flow Range:
0.004...75.7LPM |
|
Accuracy:
±0.5% of reading |
|
Repeatability:
± 0.1% |
|
Pressure:
5000 PSI max |
|
Body: 303
or 316 SUS |
|
Temp: 180°C
max |
| Economical
cost with Tungsten Carbide sleeve bearing |
|
|
 |
|
HPM Series, Spur Gear Positive
Displacement Flow Meters |
|
For
multi-viscosity, abrasive or fluids under high pressure such as
solvent-based paints, lubricants, hydraulic oils, adhesives, sealants,
resins, isocyanates and other materials compatible with 303 SUS.
|
Flow Range:
0.04...26.5 LPM |
|
Accuracy: ±0.5%
of reading |
|
Repeatability: ±
0.01% |
|
Pressure: 5000
PSI max |
|
Body: 303 SUS or
tungsten carbide |
|
Temp: 185°C max |
| High precision
at low flow rates |
|
|
 |
|
ZHM Series, Spur Gear Positive
Displacement Flow Meters |
|
For
slow flow, multi-viscosity or abrasive fluids or fluids under high pressure.
|
Flow Range:
0.0039…1003 LPM |
|
Accuracy: ±0.5%
of reading |
|
Repeatability:
±0.01% |
|
Pressure: 9000
PSI max |
|
Body: 304SS or
316Ti |
|
Temp:
- 40 to
180°C max |
| Non-intrusive
sensor and magnet-free gears |
|
|
 |
|
JVS/HPM-SLG Series, Positive Displacement Flow Meters |
|
For
water-based and solvent-based paints & coating.
|
Flow Range:
0.04...7.6 LPM |
|
Accuracy:
±0.5% of reading |
|
Repeatability:
± 0.1% |
|
Pressure:
2000 PSI max |
|
Body: 303
or 316 SUS |
|
Temp: 180°C
max |
|
Small & light body |
| Easy to
install on robotic arms or in tight space |
|
|
 |
|
SRZ Series, Helical Gear,
Positive Displacement Flow Meters |
|
For
highly filled and abrasive fluids such as polyurethanes, polymer, glues,
sealing materials and heavy fuel oils.
|
Flow Range:
0.01...397 LPM |
|
Accuracy:
±0.5% |
|
Repeatability: ±
0.1% |
|
Pressure: 6000
PSI max |
|
Body: 303 or 316
SUS |
|
Temp: 150°C max
(higher temp available) |
|
Helical Gear design |
|
Maintain high accuracy
over entire flow range |
|
High-speed measurement
(>100:1 turndown ratio) |
| Higher
resolution & lower pressure drop |
|
|
 |
| |
|
