Polyquip Engineering Pte Ltd - AW Company

TRG-1100 Series, Turbine Flow Meters

TA-3 Sanitary Turbine Flow Meter

HM-R Turbine Flow Meter - female inch thread connections

HM-F Turbine Flow Meter - with flange

HM-9-EP Turbine Flow Meter - for low flow rates

HM-TC-NS/S Turbine Flow Meter - high-pressure applications

HM-FT Turbine Flow Meter - pharmaceutical applications

CUSTOMER ENQUIRY FORM

TRG-1100 Series, Turbine Flow Meters

For water, solvents and other lower viscosity fluids

	Flow Range:0.3...18,925 LPM
	Accuracy: ±1% of actual flow
	Pressure: 5000 PSI max
	Repeatability: ± 0.1%
	Body: 316 SUS with tungsten carbide bearing
	Operating temperature : -101…+232°c

TA-3 Sanitary Turbine Flow Meter

For food, biotechnology, pharmaceutical and other sanitary industries

	Flow Range: 1.13...1514 LPM
	Accuracy: ±1% of reading
	Repeatability: ± 0.1%
	Pressure: 1000 PSI max
	Body: 316L SUS
	Sanitary clamp end connections
	Meter temperature : 65…+148°c

HM-R Turbine Flow Meter - female inch thread connections

For tap & DI water, fuels, liquefied gases, pharmaceutical fluids, light fuel oil and solvents

Flow Range: 0.3…400 LPM

Repeatability: ±0.1%

Temp: -273…+350°c

Pressure: 9400 PSI max

Viscosity: 0.1...100 mm²/s

Response time: 5…50 msec

Resolution: 35,000 PPL max

Resistant to contamination with solids

HM-F Turbine Flow Meter - with flange

For precise measurement of instantaneous or total flow rates of low-viscosity-fluids, such as fuel oil, tap & DI water, fuels, liquefied gases and solvents.

	Flow Range: 0.03...48,000 LPM
	Repeatability: ±0.1%
	Temp: -273…+350°C
	Response time: 5…50 msec
	Resolution: 35,000 PPL max
	With flanges as per DIN or ANSI
	Low contamination risk

HM-9-EP Turbine Flow Meter - for low flow rates

For small flow rates applications

	Flow Range: 0.03...0.8 LPM
	Repeatability: ±0.5%
	Response time: 3…5 msec
	Temp: -20…+180°C
	Viscosity: 15 mm²/s max
	Body: 303/316/329 SUS
	Pressure: 9400 PSI max
	Resolution: 139,000 PPL max

HM-TC-NS/S Turbine Flow Meter - high-pressure applications

For high pressure applications

	Flow Range: 0.3...33 LPM
	Pressure: 58015PSI max
	Body: 316 SUS with tungsten carbide bearing
	High flow rate turbine with BASF high pressure flanges available

HM-FT Turbine Flow Meter - pharmaceutical applications

For pharmaceutical applications

	Flow Range: 0.3...400 LPM
	Internal design with no dead spot and lateral flush bores
	Tri-Clamp connection as per DIN 32676

CUSTOMER ENQUIRY FORM

Last Name*
First Name*
Company Name*
E-mail Address*
Company Address
Country*
Contact Number*
Fax Number*
Industry Type*
If Machinery / Contractors, Please specify:	Machinery / Contractor - Oil / Gas Machinery / Contractor - Chemistry Machinery / Contractor - Pharmaceutical Machinery / Contractor - Semiconductor Machinery / Contractor - Electronics Manufacturing Machinery / Contractor - Food and Beverages
Product
Details of Enquiry

[ Home ] [ About Us ] [ Products ] [ News ] [ Enquiry ] [ Contact Us ]

Send mail to sales@polyquip.com.sg with questions or comments about this web site. Copyright © 2005 Polyquip Engineering Pte Ltd Last modified: 26/03/14

Send mail to sales@polyquip.com.sg with questions or comments about this web site.
Copyright © 2005 Polyquip Engineering Pte Ltd
Last modified: 26/03/14