 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TSK Hot Air Generator |
 |
50% more economical than conventional ovens |
|
Low operational cost |
|
High efficiency by re-circulating the exhaust air back to the generator |
|
Reaching to 250oC in less than a minute |
|
Built-in temperature and fan speed controller |
|
Capacity ranging from 1.4kW to 60kW |
|
Gas capacity from 1.48m3/min to 60m3/min |
|
Static pressure from 0.29kPa to 4.26kPa |
Ideal for:
|
Rapid Heating |
|
Rapid Drying |
|
Sterilizing / Deodorization / Disinfectant |
|
Shrink Packaging |
|
Heating of Liquid by Bubbling |
STANDARD EQUIPMENT
Heater-resistant blower
The heat-resistant blower for the hot-air
circulation is being installed standard. Electricity charges are able to be
economized on from 50% to 80% by circulating the hot-air.
(Suction air temp. TSK-10:MAX130ﾟC
TSK-15:MAX150ﾟC TSK-21-81:MAX230ﾟC
TSK-90-120:MAX170ﾟC)
Safety device
All the types are incorporated the overheat sensor to the hot-air outlet, heater
element, suction side, and blower as the over heat measure to operate 365 days
continuation.
Inverter installation
It consists to energy conservation operation considerably than the
gas capacity adjustment by the damper with that adopted the inverter to all
types. Performance of the blower is able to demonstrate maximally also in 50Hz
areas without being influenced to power supply specification, and further more
it can discharge a wide gas capacity.
Service terminal
The service terminal for input and output is being installed to all the types.
In this way, the output etc. of abnormal signal of hot-air generator and the
operation command from the external are able to conduct easily.
