 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vacuum Pump Servicing Test Report
POLYQUIP
offers a viable cost savings alternative to in-house
pump repair or
maintenance, overhaul & servicing by a competent team using genuine
spare parts to solve your problems in the area of vacuum.
We
offer the following services on vacuum pumps:
|
Download brochure
|
|||||||||||||||||||||
We
perform vacuum pump repair service on Rotary Vane, Rotary
Piston, Diffusion, Turbo, Dry, and Booster Pumps - Alcatel,
Edwards, Galileo, Robinair, Varian, and other brands of vacuum
pumps.
We notify
the customer
if complications arise during
vacuum pump repair.
We
also
provide shop audits on request.
Every vacuum pump is undergoing a stringent quality check
followed by complete testing using standard vacuum gauges and
equipments to measure the performance of the pump after service.
All
the pumps will be issued with a clear identification tag on
service details and its performance levels when tested.
All
the replacement spare parts are the OEM spares bought from the
respective manufacturers or distributors.
All
the serviced pumps are given with a competitive and confident
warranty for the parts, and labor based on the condition of
replacement of oil as per manufacturer specifications.
|
   | |||||||||||||||||||||
PHASE 1
Pumps are dismantled at designated workstation. All parts are initially cleaned with a degreaser, then rinsed and blow dried with compressed air.
PHASE 2
Surfaces of all components are stripped down to bare metal by means of rinsing with solvent leaving surfaces virtually free of all harmful residues.
PHASE 3
All critical dimensions of moving parts and mating surfaces are inspected. Mating surfaces and O-ring surfaces are hand lapped to precise finishes. All these parts are coated with oil in preparation for reassembly. All other components are discarded and replaced.
PHASE 4
Pump is assembled at designated clean area. Gaskets, seals, and O-rings are routinely replaced, along with any other component or components that do not meet factory specifications and/or tolerances.
PHASE 5
After pump has been properly assembled; it is forwarded to designated bench test station. A vacuum gauge is used to test absolute vacuum pressure and a pirani gauge.
PHASE 6
After assembly, pump is tested, monitored and charged with fresh fluid.
PHASE 7
Necessary paperwork is attached to pump including a tag showing pump testing results and particulars. |
|
|||||||||||||||||||||
Vacuum Pump Servicing Test Report includes :
|
|
|||||||||||||||||||||
