Polyquip Logo
Inverter & Blower
FRENIC MEGA G1S Series(0.2-400KW, 3Ø) - Replacement of G11S Series

Feature

Frenic 5000G11S achieved starting torque of 200% at 0.5Hz, with our unique dynamic torque vector control system. It can fully replete with useful functions like auto tuning. Frenic 5000G11S is main drive units for textile, plastics and wood industry, air conditioning, fans, pumps, presses, machine tool, mechanical handling and elevators etc.

Product Range

The capacity range of Frenic 5000G11S are:
3 Phase 200V 0.2kW to 90 kW
3 Phase 400V 0.4kW to 400 kW
 
GENERAL SPECIFICATIONS
Series FRENIC5000G11S
Output overload capability 200% of rated current for 0.5s
150% of rated current for 1min
Braking torque Regenerative braking 150% or more at 3% ED
(0.75kW or less)

100% or more at 5 to 2% ED
(1.5 to 7.5kW or less)

20% or more
(11 to 22kW)

10 to 15%
(30kW or more)
DC injection braking Starting frequency: 0.1 to 60Hz (adjustable)
Braking time: 0 to 30s (adjustable)
Braking voltage: 0 to 100% (adjustable)
Acceleration/deceleration time 0.01 to 3600s
(Acceleration/deceleration can be set independently)
Multi frequency control 16 steps
Frequency setting signal 0 to ±5V DC, 0 to ±10V DC, 4 to 20mA
Protective functions Stall prevention, overcurrent, instantaneous power failure or undervoltage, overvoltage, inverter overheating, external alarm (tripping of external thermal overload relay), motor overload (tripping of electronic thermal overload), communications error, CPU error, memory error, short-circuit, ground fault, blown out fuse, input open-phase protection, output open-phase protection
Alarm relay output SPDT contact
Enclosure and cooling method Totally enclosed natural cooling type [IP40]
(0.75kW or less)

Totally enclosed fan cooling type [IP40, except fan]
(1.5 to 2.2kW)

Fan cooling type [IP00]
(30kW or more)

For inverters of 30kW or more, the totally enclosed type [IP20] is optional.

INPUT VOLTAGE & PRODUCT RANGE
Rated AC Input Voltage
Nominal input voltage Capacity AC input voltage and frequency
3-phase 200V 22kW or less 200 to 230V 50/60Hz
30kW or more 200 to 220V 50Hz
220 to 230V 50Hz
(Order individually)
200 to 230V 60Hz
3-phase 400V 22kW or less 380 to 480V 50/60Hz
30kW or more 380 to 440V 50Hz
380 to 480V 60Hz
 
Allowable Variation
Voltage +10% to -15%
Frequency +5% to -5%
Imbalance rate in power supply voltage 2% or less
(Conforms to IEC61800-3(5.2.3))
Kindly contact our office for full catalogue.

 
Inverter & Blower
Specially developed for variable torque loads such as fans & pumps.
Suitable for tranverse conveyor, conveyor for food processing machines, mixer, chemical equipment, wood processing machine & centrifugal separators.
Suitable for most applications.
High pressure and vacuum-low noise